Welcome to NXT-progs! Here you will find programs for NXT-G created by me and other NXT-progs contributers. Free downloads of these programs are available in the posts; just click the links. Please give feedback for the programs you download. For any questions, contact me at rrffcre@gmail.com. Enjoy!
Pages
Usage Policy
These programs are designed for recreational and educational use by non-competitive individuals only. The use of these programs in competitive events (e.g. FLL) is prohibited. NXT-progs is not responsible for the misuse of these programs.
Showing posts with label Other. Show all posts
Showing posts with label Other. Show all posts
Monday, December 17, 2012
HiTechnic Rotacaster
For those of you looking for the perfect third wheel for your robot design, look no further. These omni-wheels allow smooth movement in every direction and don't have the annoying effect caused by a caster. During my four years on an FLL team we experimented with many forms of third wheels and I wish we would have been able to use these, but unfortunately they are not made be LEGO and not allowed. But for those of you just using them for fun, I have bought then and tested them and do not fail to amaze. Please take a look at HiTechnic's Rotacaster.
Thursday, December 8, 2011
Perpendicular alignment
Wednesday, April 13, 2011
Important NXT Note
Here is something that all you people programming the NXT may find helpful. According to RobotC and my experience, the NXT has hardware limitations that make it so that it can not recognize multiple button presses. If you have three switches inside a loop to show what buttons are pressed, it will see only one at a time. But, if you have a loop that exits when true and you have an AND logic block with the true/false inputs from two buttons, psuedo code following, then it will seem to recognize both.
do {/*stuff*/} until (l)==true AND (r)==true... It will exit when both are pressed.
do {/*stuff*/} until (l)==true AND (r)==true... It will exit when both are pressed.
Saturday, February 12, 2011
Bop It Game
Here is an NXT Bop-It. It is like the Bop-It! made by Hasbro. Click here to download the Bop-It sounds, programs and building instructions. Please note that after building the Bop-It that you have to put a rubber band on it, like shown in red in the pictures to the right.
Sunday, February 6, 2011
PID Controller
This is a video of my robot following the line with my PID controller. Sorry it's not quite tweaked to perfection, so there's still a little wiggle.
Below is a much better run of my PID controller with a better robot. I tweaked it so it runs a lot smoother.
Friday, February 4, 2011
Robot Building Tips
Here are some basic tips to help beginners get started with building with the NXT.
Sunday, January 30, 2011
NXT firmware version 1.28
Version 1.28 is probably the best out there as of yet. Update the firmware through the tools menu.
Firmware V1.28 download
Firmware V1.28 download
Friday, January 28, 2011
Programming guide for beginers
Here is a brief book I wrote about programming with the NXT-G software.
"Programming with the NXT" online view
"Programming with the NXT" online view
Labels:
Other
Subscribe to:
Posts (Atom)